LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1996 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - Remove/Install/Overhaul) >> Air Induction System >> Intake Air Control Valve >> Removal

Intake Air Control Valve: Removal

WARNING: This page is about a different car, the 1995 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect hoses at intake air control valve. Intake air control valve is located on end of air intake chamber. See Figure.
  2. Remove data link connector No. 1, bracket and ground straps from intake air control valve. Remove remaining nuts for intake air control valve.
  3. Remove intake air control valve by prying between air intake chamber and intake air control valve. Remove gasket.
scientia non olet · About LEMON Manuals