LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1996 >> 4Runner Limited, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Starter Relay Test

Starter Relay Test

  1. Remove starter relay. On 1995 models, relay is located in middle of relay block No. 2, right side of engine compartment. On 1996 models, relay is located in left side of engine compartment. Using ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
Fig 1: Testing Starter Relay
G93A82271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals