Power Window Switch Continuity Test (Back Door/Tailgate)

Using an ohmmeter, check continuity between specified terminals with back door/tailgate power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY TEST (BACK DOOR/TAILGATE) table. See Fig 1. If continuity does not exist at specified terminals, replace appropriate power window switch.

POWER WINDOW SWITCH CONTINUITY TEST (BACK DOOR/TAILGATE)

Application & Position

⁽¹⁾ Terminals No.

1995 Models

2 & 5

OFF

None

DOWN

1 & 2

Switch Illumination (UP, OFF & DOWN)

3 & 4

1996 Models

3 & 6

OFF

None

DOWN

3 & 5

Switch Illumination (UP, OFF & DOWN)

1 & 2

⁽¹⁾	See Fig 1.

Fig 1: Power Window Switch Connector ID - Back Door/Tailgate Switch (1995)

Fig 2: Power Window Switch Connector ID - Back Door/Tailgate Switch (1996)