Park/Neutral Switch Continuity Check
Disconnect electrical connector from park/neutral switch at transmission or transaxle. Using ohmmeter, check for continuity at specified terminals with gearshift in proper positions. See Fig 1. See PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS table. Replace switch if defective.
PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS
| Gearshift Position | Continuity Between Terminals | |
|---|---|---|
| 1995 | ||
| Park | "B" & "N", "C" & PL | |
| Reverse | "C" & RL | |
| Neutral | "B" & "N", "C" & NL | |
| Drive | "C" & DL | |
| 2 | "C" & 2L | |
| Low | "C" & LL | |
| 1996 | ||
| Park | 5 & 6, 4 & 7 | |
| Reverse | 4 & 8 | |
| Neutral | 5 & 6, 4 & 10 | |
| Drive | 4 & 9 | |
| 2 | 2 & 4 | |
| Low | 3 & 4 | |