LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> T100 Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Camber Adjustment >> Front Suspension

Front Suspension

  1. Check tires for wear and improper inflation. Inspect front wheel bearings for looseness. Check wheel runout. Wheel runout should not exceed .12" (3.0 mm).
  2. Inspect front suspension components for looseness. Ensure front shock absorbers work properly. Measure vehicle riding height. See RIDING HEIGHT ADJUSTMENT .
  3. Measure camber of both front wheels. If camber is not within specification, add or remove shims on upper suspension arms on 2WD models. On 4WD models, loosen and rotate adjuster cams. See WHEEL ALIGNMENT SPECIFICATIONS . See Fig 1.
Fig 1: Adjusting Front Camber & Caster
G91C02892Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals