LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Celica ST, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.8L >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Air Intake Chamber Cover Bolt/Nut (7A-FE) (1) 14 (19)
Distributor Hold-Down Bolt 15 (20)
ECT Sensor (2)
EGR Gas Temperature Sensor 15 (20)
EGR Pipe-To-EGR Valve Nut 43 (58)
Fuel Inlet Hose-To-Fuel Rail Union Bolt (7A-FE) 21 (29)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket 18 (24)
Fuel Rail-To-Intake Manifold Bolt (7A-FE) 11 (15)
Knock Sensor 33 (45)
Main Oxygen Sensor-To-Exhaust Manifold Retaining Nut (7A-FE) (2)
Sub-Oxygen Sensor-To-Exhaust Pipe Retaining Nut (7A-FE) (2)
Throttle Body Bolt/Nut (7A-FE) 16 (22)
Vehicle Speed Sensor Retaining Bolt 12 (16)
INCH Lbs. (N.m) 
EGR Valve Retaining Nut 115 (13.0)
Fuel Pressure Regulator Bolt (7A-FE) 82 (9.3)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt 31 (3.5)
PNP Switch Retaining Bolt 48 (5.4)
PNP Switch Retaining Nut 61 (6.9)
(1) Tighten bolts/nuts to specification in sequence. See Figure.
(2) Information not available at time of publication.