LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Avalon XL >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Air Induction System >> Intake Air Control Valve >> Removal

Intake Air Control Valve: Removal

  1. Disconnect negative battery cable. Disconnect hoses at intake air control valve. Intake air control valve is located on end of air intake chamber. See Figure.
  2. Remove data link connector No. 1, bracket and ground straps from intake air control valve. Remove remaining nuts for intake air control valve.
  3. Remove intake air control valve by prying between air intake chamber and intake air control valve. Remove gasket.
scientia non olet · About LEMON Manuals