Power Window Switch Continuity Test (Passenger Side & Rear Switches)

Using an ohmmeter, check continuity between specified terminals with power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY TEST (PASSENGER SIDE & REAR) table. See Fig 1. If continuity does not exist at specified terminals, replace appropriate power window switch.

POWER WINDOW SWITCH CONTINUITY TEST (PASSENGER SIDE & REAR)

Application & Position

⁽¹⁾ Terminal No.

1 & 5; 3 & 4

OFF

1 & 2; 3 & 4

DOWN

1 & 2; 4 & 5

⁽¹⁾	See Fig 1.

Fig 1: Power Window Switch Connector Terminals (Passenger Side & Rear Switches - Harness Side)