LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1994 >> T100 DX, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Knock Sensor >> 2.7L

Knock Sensor: 2.7L

  1. Knock sensor(s) are located on the cylinder block. See Fig 1. Remove knock sensor from cylinder block before testing. See REMOVE/INSTALL/OVERHAUL article.
  2. Using ohmmeter, check that no continuity exists between electrical terminal of knock sensor and body of knock sensor. Replace knock sensor if continuity exists.
Fig 1: Identifying Knock Sensors (2.7L)
G94E45835Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals