Throttle Cable
- Remove air cleaner. Check throttle cable bracket and linkage for looseness or bending. Fully depress accelerator pedal and check that throttle valve opens fully.
- Fully depress accelerator pedal. Adjust cable housing so distance between rubber boot end and cable stopper or paint mark is .04" (1 mm). See Fig 1. Tighten lock nut.
- For new throttle cables, stopper or paint mark will not be in place. Bend new cable so there is a 7.87" (200 mm) radius and pull inner cable slightly until resistance is felt. See Fig 2.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002