With Air Bag
- Disconnect cruise control switch 6-pin connector. Connector is located underneath steering wheel. Check for continuity between White/Black wire and Green/Black wire of 6-pin connector. With cruise ON-OFF switch off, continuity should not exist. With cruise ON-OFF switch on, continuity should exist. If continuity is as specified, go to next step. If continuity is not as specified, replace switch.
- With control switch is specified position, measure resistance between White/Black wire and Green/Yellow wire of 6-pin connector. See CRUISE CONTROL SWITCH SPECIFICATIONS table. If resistance is as specified, switch is okay. If resistance is not as specified, replace switch.