LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1994 >> Supra 2JZ-GTE, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Testing >> Power Window Switch Illumination Test (Driver's Side Switch)

Power Window Switch Illumination Test (Driver's Side Switch)

NOTE: Illumination test is for all switches at driver's side power window switch.

Using a 12-volt battery, connect jumper wire from positive battery terminal to driver's side power window switch connector terminal No. 4. See Figure. Connect jumper wire from negative battery terminal to terminal No. 8. Ensure power window switches illuminate. If illumination is not as described, replace driver's side power window switch.

scientia non olet · About LEMON Manuals