Steering Column: Reassembly
- To reassemble, reverse disassembly procedure. Apply molybdenum disulfide lithium base grease to tilt lever assembly, lock bolt, mainshaft and steering bolt pivot points. Install steering column tube tilt bolts.
- If upper column tube mark is "1", install hollow tipped thread bolt. If upper column tube mark is "2", install plain thread bolt. See Figure. With tilt pawl and ratchet engaged, install 2 pawl stoppers. Ensure alignment marks on tilt pawl and stopper align when stopper is rotated to pawl side. See Figure. If alignment marks do not align, select a different size pawl stopper. See TILT PAWL STOPPER SELECTION .
TILT PAWL STOPPER SELECTION
| Mark Tilt Lever Side | Mark Tilt Sub Lever Side | In. (mm) |
|---|---|---|
| 1 | A | .498-.502 (12.65-12.75) |
| 2 | B | .494-.498 (12.55-12.65) |
| 3 | C | .490-.494 (12.45-12.55) |
| 4 | D | .486-.490 (12.32-12.45) |
| 5 | E | .482-.486 (12.25-12.35) |