LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1994 >> Pickup Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Starter Relay Test >> Starter Relay

Starter Relay

  1. Remove starter relay, located in right side of engine compartment, middle of relay block No. 2. See Fig 2. Using ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
Fig 1: Testing Starter Relay With Terminals No. 1, 2, 3 & 5
G93A82271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Locating Starter Relay
G93D82274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals