Fuel Pump Resistor (Turbo)
- Ensure ignition is off. Disconnect fuel pump resistor electrical connector. See FUEL PUMP RESISTOR LOCATION table.NOTE: Fuel pump resistor may also be identified using appropriate illustration in THEORY/OPERATION article. On MR2 Turbo, ensure proper resistor is checked, as fuel injector solenoid resistor is located near fuel pump resistor.
- Using ohmmeter, measure resistance between fuel pump resistor electrical terminals. Replace fuel pump resistor if resistance is not within specification. See FUEL PUMP RESISTOR SPECIFICATIONS table.
FUEL PUMP RESISTOR LOCATION
| Application | Location |
|---|---|
| MR2 Turbo | Driver Side Rear Corner Of Engine Bay, Near ECM & Contains 2-Wire Connector |
FUEL PUMP RESISTOR SPECIFICATIONS
| Application | Ohms |
|---|---|
| MR2 Turbo | .73 |