Park/Neutral Switch Continuity Check
Disconnect electrical connector from park/neutral switch at transmission or transaxle. Using ohmmeter, check for continuity at specified terminals with gearshift in proper positions. See Fig 1. See PARK/NEUTRAL SWITCH CONTINUITY table. Replace switch if defective.
PARK/NEUTRAL SWITCH CONTINUITY
| Gearshift Position | Check Between Terminals |
|---|---|
| Park | "B" & "N", "C" & PL |
| Reverse | "C" & RL |
| Neutral . | "B" & "N", "C" & NL |
| Drive | "C" & DL |
| 2 | "C" & 3L |
| Low | "C" & 2L |