Pick-Up Coil Resistance
WARNING: This page is about a different car, the 1993 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
- Note pick-up coil terminal identification on the distributor. See Fig 1 or Fig 2. Using ohmmeter, measure resistance between specified terminals. See PICK-UP COIL RESISTANCE SPECIFICATIONS table.
- Replace distributor assembly if pick-up coil resistance is not within specification.
PICK-UP COIL RESISTANCE SPECIFICATIONS
| Application Type | Terminals Tested | Pick-Up Coil (1) Ohms | ||
|---|---|---|---|---|
| Turbo | G1 & G- | 125-200 | ||
| Turbo | G2 & G- | 125-200 | ||
| Turbo | NE & G- | 155-250 | ||
| Non-Turbo | G+ & G- | 185-275 | ||
| Non-Turbo | NE+ & NE- | 370-550 | ||
|
||||