Pick-Up Coil Resistance
- Note pick-up coil terminal identification on the distributor. See Figure. Using ohmmeter, measure resistance between specified terminals. See PICK-UP COIL RESISTANCE SPECIFICATIONS table.
- Replace distributor assembly if pick-up coil resistance is not within specification.
PICK-UP COIL RESISTANCE SPECIFICATIONS
| Application | Terminals | (1) Ohms | ||
|---|---|---|---|---|
| 3.0L | G1 & G- | 125-190 | ||
| 3.0L | G2 & G- | 125-190 | ||
| 3.0L | NE & G- | 155-240 | ||
|
||||