LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation

Removal & Installation

  1. Disconnect battery negative cable. Drain coolant. Disconnect accelerator and throttle cables from throttle body linkage. Disconnect air cleaner hose from throttle body. Unplug throttle position sensor connector. Disconnect coolant by-pass hoses(s) from throttle body.
  2. Mark/label and disconnect emission control vacuum hoses from throttle body. Remove 3 bolts and one nut mounting throttle body to air intake chamber.
  3. To install, reverse removal procedure. To secure throttle body, tighten 3 bolts and one nut to 108 INCH lbs. (12 N.m).
scientia non olet · About LEMON Manuals