LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Disconnect battery negative cable. Remove service hole cover in luggage compartment area. Release fuel pressure at filter. See FUEL SYSTEM PRESSURE RELEASE . Disconnect and plug fuel pump hose ends. Remove screws securing fuel pump bracket assembly to fuel tank. Remove fuel pump bracket assembly.
  2. Disconnect 2 nuts securing fuel pump wires to fuel pump and remove wires. Pull lower end of fuel pump (with filter) from bracket. Disconnect fuel hose from pump and remove fuel pump. To install, reverse removal procedure. Tighten fuel pump bracket retaining screw to 35 INCH lbs. (3.9 N.m).
scientia non olet · About LEMON Manuals