Torque Specifications
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1992 Toyota Supra, 1992 Toyota Previa, 1992 Toyota Pickup, 1992 Toyota Cressida, and 1992 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| ADD Actuator Bolts | 15 (20) | |||
| Clutch Case Bolts (With ADD) | 58 (78) | |||
| Differential Case Bolts | ||||
| Cressida & Supra | 35 (47) | |||
| Drain Plug | 36 (49) | |||
| Differential Mounting Bolt & Nut | ||||
| Celica All-Trac - Front | 70 (95) | |||
| Celica All-Trac - Rear | 108 (146) | |||
| Forward Case Mount - Cressida | 71 (96) | |||
| Rear Cover Mount Bolt | 90 (122) | |||
| Forward Crossmember Mount | ||||
| Pickup 4WD & 4Runner 4WD | 108 (146) | |||
| Side Mounts | 148 (201) | |||
| Previa 4WD | 54 (73) | |||
| Forward Case Mount - Supra | 123 (167) | |||
| Rear Cover Stud Nuts | 67 (91) | |||
| Differential Tube Bolts | 65 (88) | |||
| Drive Shaft Flange Bolts | ||||
| Except Previa 4WD | 54 (73) | |||
| Previa 4WD | 31 (42) | |||
| Filler Plug | 29 (39) | |||
| Pinion Flange Nut | ||||
| Cressida & Supra (1) | 134-250 (182-339) | |||
| Celica All-Trac & Previa 4WD (1) | 80-174 (108-236) | |||
| Pickup 4WD & 4Runner 4WD (1) | 89-165 (121-224) | |||
| Rear Cover Bolt | 34 (46) | |||
| Rear Crossmember Bolt | ||||
| Celica All-Trac | 53 (72) | |||
| Ring Gear Bolts | 71 (96) | |||
| Side Bearing Cap Bolts | 58 (78) | |||
| Side Gear Flange-To-Axle Shaft Nut | ||||
| Except Pickup 4WD & 4Runner 4WD | 51 (69) | |||
| Pickup 4WD & 4Runner 4WD | 61 (83) | |||
| Side Gear Shaft Tube Bolts | ||||
| Except Pickup 4WD & 4Runner 4WD With ADD | 65 (88) | |||
| Pickup 4WD & 4Runner 4WD With ADD | 58 (78) | |||
| Wheel Lug Nuts | 76 (103) | |||
|
||||