LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> Camry XLE, 2.2 S >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Rear Window Regulator >> Installation

Rear Window Regulator: Installation

NOTE: Apply MP grease to window regulator rollers.
  1. Place window regulator through the service hole. Connect the connector. Install the regulator with two nuts. Tighten nuts to 48 in. lbs. (5.4 N.m).
  2. Install door inside panel frame with three bolts. Install four nuts. Tighten nuts to 48 in. lbs. (5.4 N.m).
  3. Install rear door weatherstrip by pushing sown on the clips.
  4. Install rear window.
  5. Install rear door trim panel.
scientia non olet · About LEMON Manuals