LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> 4Runner 4D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Engine Controls - System/Component Tests >> 4WD Switch

4WD Switch

  1. The 4WD Switch is located on right side of transfer case. Remove switch from transfer case. Connect ohmmeter between switch terminals.
  2. Push pin on end of switch inward and ensure continuity exists. No continuity should exist when switch pin is released (outward) position. Replace switch if defective.
scientia non olet · About LEMON Manuals