LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1992 >> 4Runner 2D Utility, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Diodes

Bench Testing: Diodes

  1. With diode assembly removed and on bench, contact positive diode plate terminal with one ohmmeter probe. Using other ohmmeter probe, contact each of 3 diode leads in same plate. Note ohmmeter reading. Reverse ohmmeter probes, and repeat tests for all diodes.
  2. All diodes should show a low reading in one direction and no reading in opposite direction. If any diode is defective, replace diode/rectifier assembly.
scientia non olet · About LEMON Manuals