Continuity Testing

With switch in ON (pushed) position, continuity should exist. With switch in OFF (free) position, continuity should not exist. See CLUTCH START SWITCH CONTINUITY SPECIFICATIONS table. See Fig 1. Replace or adjust switch as necessary.

CLUTCH START SWITCH CONTINUITY SPECIFICATIONS ⁽¹⁾

Application

In. (mm)

MR2 & Previa

.176-.216 (4.5-5.5)

Pickup, Supra & 4Runner

.374-.414 (9.5-10.5)

⁽¹⁾	Distance of plunger tip from threaded end of switch where continuity changes. See Fig 1.

Fig 1: Testing Clutch Start Switch