LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1991 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove service hole cover, located in luggage compartment area. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect and plug fuel lines at fuel pump. Remove screws securing fuel pump and bracket assembly to fuel tank. Remove fuel pump and bracket assembly.
  2. Pull lower end of fuel pump (with filter) from bracket. Remove 2 nuts securing fuel pump wires to fuel pump. Disconnect wires. Disconnect fuel hose from pump. Remove fuel pump. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals