LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1991 >> Corolla Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Component Testing >> Brushes & Springs

Brushes & Springs

  1. Check brush length. If less than specification, replace brushes. See MINIMUM BRUSH LENGTH SPECIFICATIONS  table.
    MINIMUM BRUSH LENGTH SPECIFICATIONS

    Application In. (mm)
    Camry, Celica, MR2, Pickup & 4Runner
    1.0 kW .335 (8.5)
    1.4 & 1.6 kW .394 (10.0)
    Corolla, Land Cruiser & Previa .335 (8.5)
    Supra .394 (10.0)
  2. Check condition of brush holders, springs, spring clip and insulation between positive and negative holders. Repair or replace as needed.
scientia non olet · About LEMON Manuals