LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Cressida >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Defogger - Rear Window) >> On-Vehicle Service >> Grid Filament Repair

Grid Filament Repair

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Toyota Tercel, 1992 Toyota Supra, 1992 Toyota Previa, 1992 Toyota Paseo, and 1992 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

Clean broken wire tips thoroughly. Place masking tape along both sides of broken wire. See Fig 1. Apply Repair Paste (DuPont 4817) to broken section of grid. Remove masking tape after paste has dried. Wait 24 hours before using defogger.

Fig 1: Repairing Rear Defogger Grid Filament
G92A01033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002