Clearing Trouble Codes
WARNING: This page is about a different car, the 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- After repairs are performed, clear ECU memory. To clear memory, turn ignition off. Remove fuse from main fuse block for about 30 seconds or more.
- Fuse block is located below left side of instrument panel. See CLEARING CODES table for appropriate fuse.
- Fuse may require to be removed longer depending on the ambient temperature. Replace fuse and exit diagnostic mode. Trouble codes can also be cleared by disconnecting vehicle battery. However, other memory functions (clock, radio, etc.), will need to be reset.
CLEARING CODES
| Application | Fuse (Amperage) |
|---|---|
| Corolla | STOP (15) |