LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Corolla Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Basic Testing - 4-CYL EFI) >> Mechanical Inspection >> Compression

Mechanical Inspection: Compression

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1989 Toyota Van, 1989 Toyota Pickup, 1989 Toyota MR2, 1989 Toyota Corolla, and 1989 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.

Engine mechanical condition can be checked using a compression gauge, vacuum gauge, or an oscilloscope capable of performing a relative compression test. See oscilloscope instruction manual for availability and description of relative compression feature. For procedures and specifications, see ADJUSTMENTS EFI article in this section.

CAUTION: Use remote starter to crank engine during compression test, NOT ignition switch. Fuel injectors are triggered during the cranking mode. This could cause fire hazard, flooding, crankcase contamination, hydrostatic lock-up, or lubrication to be washed off of cylinder walls.