LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Corolla Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel Pump R & I

Fuel Pump R & I

NOTE: Wait at least 20 seconds after disconnecting battery cables before starting work on fuel system.
  1. Disconnect battery cables. Disconnect fuel lines. Drain fuel and remove fuel tank. Remove screws securing fuel pump and bracket assembly to fuel tank. Remove fuel pump and bracket assembly.
  2. Pull lower end of fuel pump (with filter) from bracket. Remove 2 nuts securing fuel pump wires to fuel pump and disconnect wires. Disconnect fuel hose from pump. Remove rubber cushion. Use small screwdriver to remove fuel pump filter retaining clip. Remove fuel pump filter. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals