Pick-Up Coil Resistance Test: V6

Measure pick-up coil resistance between terminals "G1" and "G(-)", "G2" and "G(-)", and between "NE" and "G(-)". See Fig 1.
If resistance is not within specification, replace distributor. See PICK-UP COIL RESISTANCE (V6) table. If resistance is within specification, proceed to PICK-UP COIL AIR GAP CHECK .

Fig 1: V6 Pick-Up Coil Distributor Connector Terminal ID

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

PICK-UP COIL RESISTANCE (V6)

Application

Ohms

All Models ⁽¹⁾

140-180

⁽¹⁾	Check at room temperature.