LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1989 >> Tercel Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Remove/Install/Overhaul >> Fuel Injectors & Fuel Rails >> Installation (CAMRY 2VZ-FE)

Installation (CAMRY 2VZ-FE)

  1. Install new grommets and "O" rings on injectors. Install 6 injectors on fuel rails. Install 6 insulators and 4 spacers on intake manifold.
  2. Install 3 injectors with right fuel rail into intake manifold. Ensure injectors rotate smoothly. If injectors do not rotate smoothly, check "O" rings for proper installation. Position injector connectors upward. Install 5 fuel rail bolts.
  3. Install No. 2 fuel pipe with 4 new gaskets and union bolts. See Figure. Connect fuel inlet and return hoses. Connect 3 wiring harness clamps to left fuel rail. Connect connectors for 6 injectors, cold start injector and coolant temperature sensor. Install air intake chamber.
  4. Install EGR pipe. Connect wiring harness with clamp. Install engine removal hook and air intake chamber bracket. Connect hoses and connectors removed in removal step 4).
  5. Connect cold start injector tube and connector. Install right top engine mount bracket. To complete installation, reverse removal procedure. See TORQUE SPECIFICATIONS TABLE - CAMRY 2VZ-FE .
scientia non olet · About LEMON Manuals