LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1989 >> Tercel Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Remove/Install/Overhaul >> Throttle Body >> Removal & Installation (CRESSIDA & Supra)

Removal & Installation (CRESSIDA & Supra)

  1. Drain coolant from throttle body. Disconnect accelerator connecting rod. Remove air intake connector (7M-GTE). Label and disconnect emission control vacuum hoses.
  2. Disconnect coolant by-pass hose(s). Unplug throttle position sensor. Remove air cleaner hose. Remove throttle body bracket (7M-GE). Remove throttle body. To install, reverse removal procedure. Tighten throttle body mounting bolts to 108 INCH lbs. (12 N.m).
scientia non olet · About LEMON Manuals