Lock Test
Lock starter in test stand. Adjust voltage to specification. Measure current draw and torque output. See LOCK TEST SPECIFICATIONS table.
LOCK TEST SPECIFICATIONS
| Application | Amps/Volts | Torque Inch Lbs. (N.m) |
|---|---|---|
| Tercel | 600/7.7 | 108 (12.0) |
Lock starter in test stand. Adjust voltage to specification. Measure current draw and torque output. See LOCK TEST SPECIFICATIONS table.
| Application | Amps/Volts | Torque Inch Lbs. (N.m) |
|---|---|---|
| Tercel | 600/7.7 | 108 (12.0) |