LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1989 >> Pickup Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests - 4-CYL CARBURETED >> Testing >> Vacuum Switch Check >> Corolla

Vacuum Switch Check: Corolla

  1. Disconnect vacuum switch No. 1 electrical connector. See Figure, Figure, Figure or Figure. Using an ohmmeter, Check that continuity does not exist between vacuum switch terminals.
  2. Warm engine to operating temperature. Ohmmeter should now indicate continuity between switch terminals. On California models, repeat testing procedure on vacuum switch No. 2. If vacuum switch does not function as described, replace vacuum switch.
scientia non olet · About LEMON Manuals