LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1989 >> Cressida >> Repair and Diagnosis (Single Page) >> Electrical >> Starter - NIPPONDENSO >> Component Testing >> Commutator

Component Testing: Commutator

  1. If out-of-round is more than .002" (.05 mm), turn the commutator on a lathe until out-of-round is within specification.
  2. Wear or cutting limit of commutator is 1.22" (31.0 mm) for Cressida and Supra, and 1.14" (29.0 mm) for all others.
  3. If worn less than .008" (.20 mm), insulating mica should be undercut to a depth of approximately .015-.031" (.40-.80 mm) on all other models.
scientia non olet · About LEMON Manuals