Tune-Up - 4-CYL: Adjustments: Distributor

All models use transistorized electronic ignition. Reluctor-to-pick-up air gap is the only adjustment. Measure air gap with a non-magnetic feeler gauge. If necessary move pick-up to correct air gap. If air gap is not adjustable, replace distributor housing.

Fig 1: 3A-C, 3E & 4A-C Firing Order & Distributor Rotation

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: 4A-GE Firing Order & Distributor Rotation

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: 4A-C (RWD) Firing Order & Distributor Rotation

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002