LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Land Cruiser >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A-440F >> On-Vehicle Service >> Control Valve Assembly >> Removal

Control Valve Assembly: Removal

  1. Clean exterior of transmission. Drain fluid. Remove oil pan protector. Remove oil pan and gasket. Remove magnets. Remove lock-up relay valve body plate and gasket. DO NOT  drop lock-up relay valve pins.
  2. Using large screwdriver, remove oil tubes. Temporarily install lock-up relay valve body plate with 4 short bolts. Remove oil strainer and gasket. Remove control valve assembly bolts. Note bolt location and length. Disconnect throttle cable from cam and remove control valve assembly.
scientia non olet · About LEMON Manuals