LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> Pickup Base, 22-RTE, W56 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator - NIPPONDENSO >> Overhaul >> Component Replacement >> Brushes

Component Replacement: Brushes

  1. Check for cracks and minimum length of .18-.22" (4.5-5.5 mm). If damaged or worn, replace brushes. Brushes should slide smoothly in holders. Install new springs when replacing brushes. Solder brush wire.
  2. New brush protrusion should be .49" (12.5 mm) for Tercel, .79" (20. mm) for diesel engine equipped models, .41" (10.5 mm) for all other models.
scientia non olet · About LEMON Manuals