Engine Cooling Systems: Radiator: Removal
- Drain coolant.
- For A/T models only disconnect oil cooler hoses. Remove and lay the washer fluid tank to one side without disconnecting the hoses. Disconnect the 2 cooler hoses from the radiator, see NOTE below.NOTE: Be careful because some oil will leak out. Plug the hose to prevent oil from escaping.
- On all models remove fan shroud. Disconnect radiator hose and coolant reservoir hose from radiator. Remove radiator upper bolt and raise vehicle.CAUTION: Make sure vehicle is securely supported.
- Remove engine under cover. Remove radiator by removing the nuts and pull out the radiator from the frame.