Main Body
- Disconnect throttle positioner links and remove bracket attaching bolts. Remove accelerator pump retainer gasket and remove pump discharge weight, long spring and discharge large ball. See Figure.
- Remove pump dampening spring and using tweezers, remove retainer and check ball. Remove slow jet, power valve with jet and throttle positioner levers. Remove primary and secondary main passage plugs, primary main jets and gaskets.
- Remove AAP housing, diaphragm and spring. Remove AAP inlet plug and check ball. Remove outlet plug, short spring and small ball. Remove primary and secondary small venturies.
- Remove sight glass retainer, sight glass and "O" ring. Remove throttle lever return spring and back spring. Remove the throttle lever and fast idle cam.
- Disconnect link, and remove secondary throttle valve diaphragm assembly and gasket. Remove the 3 body-to-flange bolts and vacuum passage bolt. Separate body from flange. See Fig 1.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002