Cruise Control Systems: Testing: Switches: Cressida
- With main switch on, there should be continuity between terminals 3 and 5, 3 and 4 and 1 and 2. In off position, there should be continuity between 3 and 5 and 3 and 4. To test clutch switch, check that there is continuity between terminals 2 and 3 with the pedal depressed and none with it returned.
- Stop light switch should have continuity between 1 and 2 terminals with pedal depressed and between terminals 3 and 4 with pedal returned. Parking brake switch must show continuity between the terminals with the brake pulled and none with it released.