Fuel Cut Deceleration System
WARNING: This page is about a different car, the 1985 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- Connect tachometer to engine. Start and warm engine to normal operating temperature.
- Disconnect wiring connector from throttle position sensor. Using a jumper wire, short-circuit terminals TL and IDL on wiring connector.
- Slowly raise engine speed and watch tachometer. Tachometer should fluctuate between 1900-1600 RPM (Auto. Trans.) or 2000-1600 RPM (Man. Trans.).