No Load Test
- Connect ammeter in series with starter motor and 12-volt battery. See Fig 1. Connect voltmeter in parallel with battery and observe readings.
- Starter should spin smoothly at 3000 RPM or more with current draw below 90 amps (180 amps on diesel engines) at 11.5 volts.
APPLICATION
| Model | (1) Part No. | |||
|---|---|---|---|---|
| Camry (Gas) | 28100 63020 | |||
| Camry (Diesel) | 28100 64050/64090 | |||
| Celica | 28100 34080 | |||
| Corolla (Gas) | ||||
| Manual Transmission | 28100 64050 | |||
| Automatic Transmission (FWD) | 28100 15120 | |||
| Automatic Transmission (RWD) | 28100 15040 | |||
| Corolla (Diesel) | ||||
| Manual Transmission | 28100 64050 | |||
| Automatic Transmission | 28100 64090 | |||
| Cressida & Supra | 28100 45050 | |||
| Land Cruiser | 28100 60070 | |||
| Pickup (Gas) | 28100 34080/35040 | |||
| Pickup (Diesel) | 28100 54090 | |||
| Van | 28100 72010 | |||
| 4Runner | 28100 34080/35040 | |||
|
||||