LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1983 >> Tercel Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T - Overhaul >> Final Drive >> Differential Assembly >> Disassembly

Differential Assembly: Disassembly

NOTE: Before removing, tag bearing cap, outer race and side washer for reference at reassembly.
  1. Remove oil seals from differential carrier using a slide hammer. Remove side bearing caps. Remove side washer on ring gear teeth side using side washer removal tool.
  2. Remove differential case and bearing outer race. Remove side washer opposite ring gear. To remove governor body and governor pressure adaptor, use snap ring pliers to remove snap ring, then remove governor body. Wrap spline with tape and remove governor pressure adaptor.
  3. Loosen staked part of drive pinion nut. Using drive pinion holding tool to loosen nut, turn drive pinion clockwise. Using a press, press drive pinion from housing.
scientia non olet · About LEMON Manuals