LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1983 >> Tercel Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator - NIPPONDENSO >> Overhaul >> Component Replacement >> Brushes

Component Replacement: Brushes

  1. Check for cracks and minimum length of .22" (5.5 mm). If damaged or worn beyond limit, replace brushes. Brushes should slide smoothly in holders. Install new springs when replacing brushes. Solder brush wire.
  2. New brush protrusion should be .413" (10.5 mm) for Camry models, and .492" (12.5 mm) for all other models.
scientia non olet · About LEMON Manuals