LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1983 >> Pickup 3/4 Ton >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Diesel >> Testing >> Fuel Cut Solenoid >> Solenoid Check

Solenoid Check

  1. Turn ignition on. Repeatedly connect and disconnect wire at fuel cut solenoid. If a clicking noise is heard, solenoid is okay.
  2. If no noise is heard, check 15A fuse. If blown, repair short and replace fuse. If fuse is good, apply battery voltage to solenoid and check for noise.
  3. If no clicking sound, replace solenoid. If sound is heard, check wiring harness and ignition switch.
scientia non olet · About LEMON Manuals