LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1982 >> Corolla Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3-TC 4-Cylinder >> Valves >> Rocker Arm Assembly

Rocker Arm Assembly

  1. Remove cylinder head. Remove rocker arm assembly. To disassemble, remove 4 retainer springs at each corner, both end supports, compression springs and 2 end rocker arms.
  2. Remove remaining middle 3 supports, 4 rocker arms and springs off rocker support shafts. Clearance between rocker arms and shaft should be 0.0024" (0.060 mm) maximum.
    NOTE: Mark all parts to reassemble in order. Place washer between rocker arm and support number three (center).
    Fig 1: Partially Disassembled Rocker Arm Assembly
    G09332291Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals