Steering Column: Reassembly
To reassemble components, reverse disassembly procedure and note the following: Apply a light coat of grease to both sides of "O" ring.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) |
|---|---|
| Steering Gear-to-Frame | 22-33 (3.04-4.56) |
| Pitman Arm-to-Sector Shaft | 58-87 (8.02-12.0) |
| Column Tube Clamp | 22-33 (3.04-4.56) |
| Steering Wheel Nut | 14-22 (1.94-3.04) |